EasyManua.ls Logo

Panasonic KX-FT21BX

Panasonic KX-FT21BX
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING GUIDE
- 83 -
KX-FT21LA
4. PROGRAMMING AND LISTS
The programming functions are used to program the various features and functions of the machine, and to test the
machine. Programming can be done in both the on-hook and off-hook conditions. This facilitates communication
between the user and the service while programming the machine.
4-1. OPERATION
There are 2 basic categories of programming functions, the User Mode and the Service Mode. The Service Mode is
further broken down into the normal and special programs. The normal programs are those listed in the
Operating Instructions and are available to the user. The special programs are only those listed here and not displayed
to the user. In both the User and Service Modes, there are Set Functions and Test Functions. The Set Functions are
used to program various features and functions, and the Test Functions are used to test the various functions .
The Set Functions are accessed by entering their code, changing the appropriate value, then pressing the SET key.
The Test Functions are accessed by entering their code and pressing the key listed on the menu. While programming,
to cancel any entry, press the STOP key.
4-2. OPERATION FLOW
Programming
User mode
(user programmable)
Service mode
(not user programmable)
(2) SET mode
(1) TEST mode
Normal
Special
(3) SET mode
(4) SET mode
(5) TEST mode
PRINT mode (Prints out a list to confirm
the set values.)
PRINT mode (Prints out a
list to confirm the set values.)
User mode
Print out
User mode
Operating Procedure
MENU button
LCD
1.SYSTEM SET UP
#
LCD
SETUP ITEM [ ]
XXXXXXX
Follow the instructions on the LCD.
Code
MENU button
(Some codes are for the Test Functions, while others are for the Set Functions.)
LCD
2.PRINT LIST
START/COPY/SET button
# 9 0 0 0 •–
Code
Set value
Print out
XXXXXXX
(Some codes are for the Test Functions, and some are for the special
and normal Set Functions.)
Follow the instructions on the LCD.
Service mode
START/COPY/SET button
LCD
P-SF-• ¡
START/COPY/SET button
BASIC LIST / ADVANCED LIST
LCD
£button

Table of Contents

Related product manuals