-4-
(Model KX-FT21BX/KX-FT21BX-W)
KX-FT21BX/KX-FT21BX-W
Program mode Table (Change from original page 55)
Code Function Set Value Default Remote setting
001 Set the date and time mm/dd/yy hh:mm AM/PM
---------
NG
002 Your logo
--------- ---------
NG
003 Your fax number --------- --------- NG
004 Print transmission report 1:ERROR 2:ON 3:OFF ERROR OK
007 FAX ring count 1 to 4 rings
1 ring
OK
013 Dialing mode 1:PULSE/2:TONE TONE OK
022 Journal auto print 1:ON 2:OFF ON OK
023 Overseas mode 1:ON 2:OFF OFF OK
025 Delayed send ON/OFF OFF NG
030 Silent FAX recognition ring 3 to 9 rings 3 rings OK
031 Ring detection 0:OFF 1:ON OFF OK
041 FAX activation code ON/OFF ON/ID=*9 NG
046 Friendly reception 1:ON 2:OFF ON OK
049 Auto disconnect --------- ON ---------
058 Original setting 1:NORMAL/2:LIGHT/3:DARKER NORMAL OK
070 FAX pager call ON/OFF OFF NG
076 Connecting tone 1:ON 2:OFF ON OK
077 Auto answer mode 1:FAX ONLY/2:TEL/FAX FAX ONLY OK
078 TEL/FAX delay ring 1 to 4 rings 1 OK
080 Set default YES/NO NO NG
501 Pause time 001~600 X 100 ms 030 OK
502 Flash time 01~90 X 10 ms 10 OK
503 Dial speed 1:10pps 2:20 pps 10 OK
520 CED frequency 1:2100Hz 2:1100Hz 2100 OK
521 International mode 1:ON 2:OFF ON OK
522 Auto standby 1:ON 2:OFF ON OK
523 RCV EQL. 1:ON 2:OFF OFF OK
524 SND EQL. 1:ON 2:OFF OFF OK
544 Document feed position adjustment value set 01~99 step --------- OK
553 Monitor on FAX communication select 1:OFF 2:P-B 3:ALL OFF OK
554 Modem test Press "START". --------- NG
555 Scanner test Press "START". --------- NG
556 Motor test Press "START". --------- NG
557 LED test Press "START". --------- NG
558 LCD test Press "START". --------- NG
559 Document jam detection select 1:ON 2:OFF ON OK
561 Key test Press any key. --------- NG
563 CCD position adjustment value set 00~30 mm --------- OK
570 Break % select 1:61% 2:67% 61% OK
571 ITS auto redial time set 00~99 014 OK
572 ITS auto redial line disconnection time set 001~999 set 030 OK
573 Remote turn-on ring number set 01~99 15 OK