KX-FT21LA
- 52 -
Confirm if a mechanical problem
occurred. E.g., transmission was
interrupted or the document was
out of place on the receiver side
(being polled).
DCN is received after the transmission of NSC and DTC.
Was it a mechanical
error as mentioned above?
Ask the receiver to set the poll
mode again and perform polling.
Ask the service section for the
receiver’s FAX machine to
examine the unit.
Confirm if a mechanical problem
occurred. E.g., the caller inter-
rupted the transmission.
Was it a mechanical
error as mentioned above?
Have the caller transmit the data
again.
Ask the service section for the
caller’s FAX machine to
examine the unit.
Check the hardware peripherals
of the modem.
300BPS error
Modem error
YES
YES
NO
NO
10
11
12
DCN is received after DIS transmission.
To Next Page
Loading...
