KX-FT21LA
- 58 -
OK : Can set the value by the remote programming feature or print a list.
NG : Cannot set the value.
Note: Refer to page 85 for descriptions of the individual codes.
For example, the "004 Transmission report mode" set value "1:ERROR/2:ON/3:OFF" number corresponds to the number dialled.
Code Function Set Value Default Remote setting
590 FAX auto redial time set 00~99 05 OK
591 FAX auto redial line disconnection time set 001~999 045 OK
592 CNG transmit select 1:OFF/2:ALL/3:AUTO ALL OK
593 Time between CED and 300 bps 1:75/2:500/3:1s 75 ms OK
594 Overseas DIS detection select 1:1st/2:2nd 1st OK
595 Receive error limit value set 001~999 100 OK
596 Transmit level set 15~00dBm -10 OK
598 Modem sesitivity 20~48 45 OK
717 Transmit speed select 1:9600/2:7200/3:4800/4:2400bps 9600bps OK
718 Receive speed select 1:9600/2:7200/3:4800/4:2400bps 9600bps OK
719 Ringer off in TEL/FAX mode 1:ON/2:OFF ON OK
721 Pause tone detect 1:ON/2:OFF ON OK
722 Redial tone detect 1:ON/2:OFF ON OK
763 Friendly reception CNG detection select 1:10S/2:20S/3:30S 20S OK
771 T1 timer 1:35 sec/2:60 sec 35 sec OK
774 T4 Timer 00~99 (X100ms) 00 OK
815 Sensor check Press "START". --------- NG
844 Original setting 1:NORMAL/2:LIGHT/3:DARKER NORMAL OK
991 Transmit basic list 1: START --------- OK
992 Transmit advanced list 1: START --------- OK
994 Transmit journal report 1: START --------- OK
996 Journal 3 1: START --------- OK
999 Transmit service list 1: START --------- OK
To Next Page