Feature Menu Selection
Registering the email
address destinations
[EMAIL FEATURE] Register email destinations (up to 30 destinations).
These addresses can be used as destinations for the
following features.
– Scan to email address (page 30)
– Fax to email address (page 45)
1. Start Multi-Function Station.
2. [Device] A [Configuration Web Page] A
[Network]
3. Type “root” as the user name, then enter the
password (feature #155 on page 57). A [OK]
4. Select the [EMAIL FEATURE] from the menu.
5. Click [Edit] next to [ADDRESS BOOK].
6. Click [Edit] next to the desired item you want to
register.
7. Enter the name and email address.
R Select the station key number from the
drop-down list if necessary.
8. [Submit]
9. Close the web browser.
Note:
R You can register email destinations using the unit
(page 80).
Setting the error notify
feature
[ERROR NOTIFY] [ENABLED]: The unit will send an email to registered
destinations when a problem occurs.
[DISABLED] (default): Deactivates this feature.
Registering
destinations for the
error notify feature
[ERROR NOTIFY] Enter the email address to which error notifications will
be sent and select the types of problems.
[LIFE WARNING]: A warning indicating that the toner
cartridge or drum cartridge needs to be replaced soon.
[MEDIA PATH ERROR]: An error indicating that there
is a problem with an input tray.
[LIFE ERROR]: An error indicating that the toner
cartridge or drum cartridge needs to be replaced.
75
9. Programmable Features
To Next Page
Loading...
