Panasonic KX-NCP1000 - Installing the Virtual IP Cards to the PBX

4.1.2 Installing the Virtual IP Cards to the PBX
1.
a. Under Configuration, click Slot.
b. Move the mouse pointer over the PBX image of
IPCMPR Virtual Slot at the top of the screen.
c. Click Select Shelf.
2.
a. Click
on the name of the desired card to install in the
list. An image of the card will be displayed.
b. Click
and drag the image of the card to the Extension
or Trunk slot depending on the card type, and
release it. The card will move into the slot space.
3. Click Yes to confirm.
24 Getting Started
4.1.2 Installing the Virtual IP Cards to the PBX