Panasonic KX-NCP1000 - Page 37

KX-NT300 series (except KX-NT321)
PBX IP Address
ENTER ENTER
Select "PBX". Select "PBX IP Address". Select "Primary PBX".
ENTER ENTER
To enter the IP address of the IPCMPR card (PBX IP Address)
Press "SETUP"
when it is displayed.
SETUP
To start programming
Supply power to the IP-PT.
To end programming
Press "STORE".
STORE
The IP-PT will reboot
and can then be
registered to the PBX.
To enter the IP address of the Secondary PBX (optional for software version 2.00 or
later only)
PBX IP Address
Software version 2.00 or later only
Select "Secondary PBX".
ENTER ENTER
Getting Started 37
4.3.1 Assigning the IP Addressing Information