To Next PageTo Next Page
Why is a reorder tone audible or "Restricted" displayed on my Panasonic KX-NCP1000 PBX?
A reorder tone or a "Restricted" message on your Panasonic PBX phone can appear for several reasons. The telephone might be locked, requiring you to unlock it. Toll restriction could be activated, in which case you should consult your manager or dealer. Finally, an account code might be required for the call.
What to do if some features do not work on Panasonic KX-NCP1000 PBX?
If some features are not working on your Panasonic PBX, system management might be restricting those features, so consult your manager. Also, the feature numbers may have changed, so confirm the revised number and try again.
How to fix Panasonic PBX telephone if it does not work properly?
If your Panasonic PBX telephone is not working properly, first confirm with your manager that your settings are correct. If the problem persists after that, consult your dealer.
What to do if my Panasonic PBX telephone does not respond when buttons are pressed?
If your Panasonic PBX telephone does not respond when buttons are pressed, it could be locked, so unlock your telephone. Alternatively, your telephone may be connected to an eXtra Device Port, which requires system programming, so consult your dealer.
How to make an outside call on Panasonic KX-NCP1000 using One-touch Dialling if it is not working?
If you cannot make an outside call using the One-touch Dialling button or speed dialling on your Panasonic PBX, a line access number was likely not stored. A line access number is required for outside calls.
What to do if parallel single line telephones do not ring on Panasonic KX-NCP1000 PBX?
If the parallel single line telephones do not ring on your Panasonic PBX, the "No ring" option may be selected. Change the setting to ring.
Why is the line disconnected while talking to an outside party on Panasonic KX-NCP1000 PBX?
If the line is disconnected while you are talking to an outside party on your Panasonic PBX, the time limit may have run out. Consult your dealer to extend the time limit, if necessary.
What to do if proprietary telephone operations do not work even after following the manual instructions on Panasonic KX-NCP1000?
If none of the operations work when using a proprietary telephone on your Panasonic PBX, even after following the manual instructions, the Intercom line was not seized. If the setting has been changed, press the INTERCOM or PDN button after going off-hook and follow the instructions. Alternatively, the seized line, when going off-hook, may have been changed by personal setting.
What to do if Panasonic KX-NCP1000 telephone does not work with personal settings?
If your Panasonic PBX telephone does not work using the personal settings or with other settings (One-touch dialling, forwarding destination, etc.), the extension line may have been changed. Clear the settings and then programme your desired settings again.
What to do if proprietary telephone does not have a feature button on Panasonic PBX?
If your proprietary telephone does not have a feature button on your Panasonic PBX, it may be because some models do not have the feature button. Change a flexible button to the desired button. Alternatively, enter the specified feature number instead of using the feature button.
General| Product color | Black |
|---|
Weight and Dimensions| Weight | 8000 g |
|---|---|
| Dimensions (WxDxH) | 430 x 430 x 130 mm |
