Panasonic KX-NS300 User Manual

1.11.4 If a Host PBX is Connected
– Accessing External Services (External Feature Access [EFA])
Accessing External Services (External Feature Access [EFA])
You can access special features (e.g., Call Waiting) offered by a host PBX or telephone company. This feature
is only effective for an outside call.
<Example> To hold the current call and then talk to the new party
PT/PS/KX-UT series/S-PS
SLT
Enter desired
service code.
desired service
code
Enter desired
service code.
Press Recall/
hookswitch.
Press FLASH/RECALL or EFA.
Or press TRANSFER and
then enter 60.
During a conversation with an outside party During a conversation with an outside party
Enter 60.
OR
(EFA)
6 0
desired service
code
6 0
OR
For KX-UT series or S-PS,
press FLASH/RECALL.
• In this case, the FLASH/RECALL button on a proprietary telephone, KX-UT series SIP phone,
or S-PS must be set to External Feature Access (EFA) mode through system programming.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit an External Feature Access (EFA) button.
226 User Manual
1.11.4 If a Host PBX is Connected

Panasonic KX-NS300 Specifications

General

System Type	Hybrid IP-PBX
Built-in Analog Extensions	2
Power Supply	AC 100-240 V, 50/60 Hz
IP Terminals Supported	Yes
Analog Terminals Supported	Yes
Digital Terminals Supported	Yes
Built-in Voicemail	Yes
Built-in Conference Bridge	Yes
Dimensions	430 mm x 88 mm x 367 mm
Networking	SIP, H.323
Built-in VoIP Channels	None (Requires optional DSP card)