Panasonic KX-TA624 - Outside Calling; Automatic Line Access; Trunk Group Access; Paging

KX-TA Advanced Hybrid System
E&OE Issue 2
18
Outside Calling
Allows an extension user to make a call to an external party by using one of the following line
access methods.
Automatic Line Access
By dialling 9 an extension user will select an idle exchange line automatically from the dial 9
group. For a proprietary telephone, a Line Access Key assignment (S-CO,G-CO,O-CO) in the
Proprietary Telephone Settings is required. If Idle Line Preference is set on the telephone in
the Proprietary Telephone Settings, the user can access an idle line only by going off-hook.
Individual Line Access
Allows a proprietary telephone user to select the desired exchange line by pressing the line
key assigned as an S-CO key.
Trunk Group Access
Allows an extension user to select an idle line within a designated trunk group. To specify a
trunk group, dial the feature number “8” and the desired trunk group number (1 through 6). A
proprietary telephone user can also specify a trunk group by pressing a G-CO key.
Paging
Allows an extension user to make a voice announcement to several people at the same time.
The message is announced over the built-in speakers of proprietary telephones and/or the
external pager. The paged person can answer the page from any extension within the system.
The following types are available.
All Extensions
Makes a voice announcement to all extensions over the built-in speakers of proprietary
telephones.
Group
Makes a voice announcement to the designated extension group over the built-in speakers of
proprietary telephones.
External
Makes a voice announcement over the external pager.
All Extensions & External
Makes a voice announcement to all extensions over the built-in speakers of proprietary
telephones and the external pager.
Paralleled Telephone Connection
Any proprietary telephone can be connected in parallel with a single line device, such as a
single line telephone, cordless telephone, modem or facsimile.
Personal Speed Dialling
Allows an extension user to store up to 10 speed dialling numbers (0 through 9) with a
maximum of 24 digits per number. An extension number, telephone number or feature
number can be stored. For example, storing extension numbers for each room in a house can
be useful. (1 = Living Room, 2 = Kitchen, etc.) To make a call, dial # and the number.