Panasonic KX-TCD210FX

Base Unit Settings
33
4 Select “Other Options”, then press
{>}.
5 Select “Base Unit PIN”, then press
{>}.
6 Enter the new 4-digit base unit PIN, then
press {j/OK}.
7 Press {ih}.
Resetting the base unit to its
default settings
1
Press {j/OK}.
2 Select “Base Unit Setup”, then
press {>}.
3 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
32).
4 Select “Other Options”, then press
{>}.
5 Select “Reset Base”, then press {>}.
6 Select “Yes”, then press {>}.
7 Press {ih}.
Note:
L The following items will be deleted or reset
to their default settings:
– Settings listed on page 29, 39, 48
– All SMS messages
– Caller list
L The following items will be retained:
– Date and time
– Shared phonebook entries (KX-
TCD220 only)
– Repeater mode
– Recordings, including your greeting
message, caller messages, voice
memos, audible call announcements,
and recorded conversations (KX-
TCD220 only)
TCD210220FX(e-e).book Page 33 Tuesday, January 18, 2005 9:04 AM