4.3 Programming the Hybrid IP-PBX
24 Getting Started
5.
a. Click Connect → USB or RS-232C from
the menu bar, depending on the serial
interface connection with the Hybrid IP-
PBX.
b. In the next screen, enter the system
password for installer (default: 1234).
c. Click OK.
6. When country/area data do not match:
a. Click OK to replace the country/area data of
the Hybrid IP-PBX. Replacement may take
several minutes to complete.
b. Follow the procedure described in "Starting
the Hybrid IP-PBX" and restart the Hybrid
IP-PBX.
c. Repeat step 5 to reconnect the KX-TDA30
Maintenance Console to the Hybrid IP-
PBX.
7. Follow the instructions of the Quick Setup
wizard and assign the basic items (Quick
Setup).
The system menu appears. You may now begin
programming the Hybrid IP-PBX.
To Next Page
Loading...
