What to do if some features on my Panasonic KX-TDA15 phone don't work?
There are a couple of reasons why some features might not be working: * System management may be restricting certain features. If this is the case, consult your manager. * The feature numbers may have changed. If so, confirm the revised number and try again.
Why is there noise on external paging with my Panasonic Telephone?
The noise you're experiencing during external paging is likely due to induced noise on the wire connecting the Hybrid IP-PBX and the amplifier. To resolve this, use a shielded cable for the connection. A shorter shielded cable is recommended for optimal performance.
What to do if external music is distorted on my Panasonic Telephone?
If you're hearing distorted external music, it's likely due to an excessive input level from the external music source. Try decreasing the output level using the volume control on the music source.
Why aren't Alternate Calling features working on my Panasonic Telephone?
Alternate Calling—Ring/Voice and Live Call Screening (LCS) do not function as set when using a Wireless Phone (KX-T7880/ KX-T7885/KX-TD7894/KX- TD7895) because voice-calling mode and hands-free mode with LCS are not available with Wireless Phones. Switch the calling mode to ring-calling or set the LCS mode to "Private".
Why does my Panasonic Telephone not respond when buttons are pressed?
There are a couple of potential reasons why your Panasonic Telephone isn't responding. It could be that the telephone is locked, in which case you should unlock it. Alternatively, your telephone might be connected to an eXtra Device Port, which requires system programming. You should consult your dealer in this case.
What to do if my Panasonic Telephone does not work using the personal settings?
If your Panasonic Telephone isn't working with your personal settings, the extension line may have been changed. Clear the settings and then programme your desired settings again.
Why is a reorder tone audible or "Restricted" displayed on my Panasonic Telephone?
A reorder tone or a "Restricted" display on your Panasonic Telephone can occur for a few reasons. The telephone might be locked, so try unlocking it. Toll restriction could be activated, in which case you should consult your manager or dealer. Finally, an account code may be required.
Why do some features not work on my Panasonic Telephone?
Some features might not be working on your Panasonic Telephone because system management may restrict certain features, so consult your manager. Alternatively, the feature numbers may have changed; confirm the revised number and try again.
Why can't I make an outside call using the One-touch Dialling button on my Panasonic Telephone?
If you cannot make an outside call using the One-touch Dialling button, a line access number was not stored. A line access number is required for outside calls.
To Next Page
General