1.1 Incoming Call Features
Feature Guide 17
3. Destination Change with the Caller's Identification Number
The Calling Line Identification (CLI) Distribution feature works in conjunction with the DIL/DID/DDI/MSN
features.
4. Available Distribution Feature for Each Optional Trunk Card Type
*: Enable (default); : Enable
5. Available Destinations
Direct Inward Dialling (DID) Directs a call with a DID number from a DID line to a preprogrammed
destination.
DID is also known as Direct Dialling In (DDI).
→ 1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Multiple Subscriber Number
(MSN) Ringing Service
Directs a call with an MSN from an ISDN line to a preprogrammed
destination.
→ 1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
Feature Description & Reference
Calling Line Identification
(CLI) Distribution
Directs a call to a CLI destination if the caller's identification number
has been assigned in the Caller ID Table.
→ 1.1.1.5 Calling Line Identification (CLI) Distribution
Trunk Card Type Channel Type
Feature
DIL DID/DDI MSN
LCOT —
*
BRI CO
*
Destination Availability
Wired Extension (PT/SLT/ISDN Extension)
PS
Incoming Call Distribution Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
ISDN Remote Maintenance
Method Description & Reference
To Next Page
Loading...
