Panasonic KX-TDA15

1.2 Receiving Group Features
Feature Guide 59
1.2.2.5 VIP Call
Description
It is possible to assign a priority to incoming call distribution groups. If an extension belongs to multiple
groups and the extension becomes idle, queuing calls in the groups will be distributed to the extension in
priority order.
Each incoming call distribution group can enable or disable the VIP Call mode. When multiple groups enable
the VIP Call mode, the incoming call distribution group with the lowest numbered group has the highest
priority. When multiple groups disable the VIP Call mode, queuing calls are distributed to extensions
uniformly.
[Example]
In the call centre, incoming call distribution groups 1 and 3 enable the VIP Call mode, while incoming call
distribution groups 2 and 4 disable the VIP Call mode.
Programming Manual References
PC Programming Manual
3.9.10 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous—VIP Call Mode
PT Programming Manual
None
Extn.
101
Extn.
102
Extn.
103
Calls have been distributed by DIL/DID/DDI/CLI.
(The number in the circle is the queuing order.)
1
6
1st
Priority
2nd
Priority
3rd
Priority
Incoming Call
Distribution
Group 1
(for VIP)
3
5
Incoming Call
Distribution
Group 2
(for general
customers)
2
4
Incoming Call
Distribution
Group 3
(for special
customers)
Distribution order:
From: Group 1 Group 3 Groups 2 and 4
1 6 2 4 3 5
Incoming Call
Distribution
Group 4
(for general
customers)
8
3rd
Priority
7 8
7