Panasonic KX-TDA15

2.2 System Configuration—Software
368 Feature Guide
2.2.3 Tenant Service
Description
This PBX can be shared with a certain number of tenants.
1. Tenant Configuration
1.1 Tenant Member
The tenant members consist of extension user groups. One extension user group can belong to
only one tenant. Therefore, one extension can belong to only one tenant.
(→ 2.2.2 Group)
1.2 Time Service
Each tenant has a Time Table. The Start and/or End time of each time mode (day/lunch/break/
night) can be set for each day of the week. The Time Table numbers correspond to the tenant
numbers respectively.
(→ 2.2.4 Time Service)
[Example]
2. System Management
Each of the following system management items can be assigned to each tenant.
a) Tenant Operator (extension number/floating extension number of incoming call distribution
group/none) (→ 2.2.5 Operator Features)
→ 3.12.6 [6-6] Tenant—Operator (Extension Number)
b) ARS Mode (Off/Local Access/All Access/System) (→ 1.9.1 Automatic Route Selection (ARS))
→ 3.12.6 [6-6] Tenant—ARS Mode
c) Music Source for Music on Hold (System/BGM Number/Cyclic Tone)
(→ 1.12.4 Music on Hold)
→ 3.12.6 [6-6] Tenant—Music On Hold
[Programming Example]
Tenant No. Operator ARS Mode Music Source
1 Extn.101 Local Access
System
*3
2
None
*1
System
*2
Cyclic Tone
3
Floating extn. no.
200
Off BGM1
Tenant 1
Use Time Table 1
Extension
User Group 1
Extension
User Group 2
Extension
User Group 3
Extension
User Group 4
Tenant 2
Use Time Table 2
Extension
User Group 5
Extension
User Group 6