1.18 Proprietary Telephone (PT) Features
Feature Guide 219
Log-in/Log-out * Used to switch between log-in and log-out mode.
Hurry-up Used to redirect the longest waiting call in the queue of an incoming
call distribution group to the overflow destination.
Wrap-up * Used to switch the Wrap-up/Not Ready and Ready modes.
System Alarm Used to confirm a PBX error.
Time Service * Used to switch the assigned time modes: day, lunch, break or night.
Also used to check the current time mode status.
Answer Used to answer an incoming call.
Release Used to disconnect the line during or after a conversation, or to
complete a Call Transfer.
Toll Restriction/Call Barring Used to change the TRS/Barring level of other extension users
temporarily.
ISDN Service Used to access an ISDN service.
Calling Line Identification
Restriction (CLIR) *
Used to switch between the CLIP and CLIR service.
Connected Line Identification
Restriction (COLR) *
Used to switch between the COLP and COLR service.
ISDN Hold Used to transfer a call using the telephone company.
Headset Used to turn on/off the headset mode while idle.
Used to switch between hands-free mode and headset modes during
a conversation.
Time Service Switching Mode
(Automatic/Manual) *
Used to switch between the Automatic Switching and Manual
Switching mode.
Two-way Record Used to record a conversation into your own mailbox.
Two-way Transfer Used to record a conversation into the mailbox of a specified
extension.
One-touch Two-way Transfer Used to record a conversation into the mailbox of a specified extension
with one touch.
Live Call Screening (LCS) Used to monitor your own voice mailbox while an incoming caller is
leaving a message and, if desired, intercept the call.
Voice Mail (VM) Transfer Used to transfer a call to the mailbox of a specified extension.
Check-in Used to switch the status of extensions from Check-out to Check-in.
Check-out Used to switch the status of extensions from Check-in to Check-out.
CTI Used to access CTI features.
*: One-touch Feature Setting Buttons: Pressing these buttons while on-hook changes the feature
settings. The new mode will be displayed for a preprogrammed time period.
Button Usage
To Next Page
Loading...
