1.1 Incoming Call Features
28 Feature Guide
Explanation:
If the caller's number is "0123-456-7890" (The Trunk Access number is disregarded):
1. Checks the number in the table.
→ Matches the number in location 000.
2. The call is routed to the CLI destination, extension 200.
Conditions
• Automatic Caller ID Number Modification
The Caller ID number is used after modification by the Automatic Caller ID Number Modification. (→
1.16.1 Caller ID)
Programming Manual References
PC Programming Manual
3.16.2 [10-2] DIL Table & Port Settings—DIL—CLI Ring for DIL—Day, Lunch, Break, Night
3.16.3 [10-3] DDI / DID Table—CLI Ring for DDI/DID—Day, Lunch, Break, Night
3.16.6 [10-4] MSN Table—CLI Ring for MSN—Day, Lunch, Break, Night
3.12.1 [6-1] System Speed Dial
→ Name
→ CO Line Access Number + Telephone Number
→ CLI Destination
PT Programming Manual
[001] System Speed Dialling Number
[002] System Speed Dialling Name
Feature Guide References
1.1.1.2 Direct In Line (DIL)
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
1.6.1.4 Speed Dialling—Personal/System
To Next Page
Loading...
