Panasonic KX-TDA15 - Page 280

1.22 Administrative Information Features
280 Feature Guide
Conditions
• SMDR Format
The following SMDR format can be set through system programming in order to match the paper size
being used in the printer:
DID/DDI number Controls whether the DID/DDI number, name, number and name,
or nothing is shown. If "none" is selected, <D> will not be shown.
→ 3.17.1 [11-1] Main—SMDR—SMDR Options—DDI/DID
Number & Name
Secret dialling Controls secret dialling. If enabled, the dialled number will be
shown as dots.
This setting is effective only when the modified number is selected
in ARS dial setting above. If the user-dialled number is selected in
ARS dial setting, the dialled number will be shown as dots
regardless of this setting.
→ 3.17.1 [11-1] Main—SMDR—SMDR Options—Secret Dial
Privacy dial Enables or disables privacy dial. If enabled, the last four digits of
the dialled telephone number and any additional digits after
connection will be shown as "X". (e.g., 123-456-XXXX)
→ 3.17.1 [11-1] Main—SMDR—SMDR Options—Privacy Mode
Date order The date order is changeable: month/day/year, day/month/year,
year/month/day, year/day/month.
→ 3.17.1 [11-1] Main—SMDR—SMDR Format—Date Format
Received call Controls whether the time of receiving an incoming trunk call is
shown.
→ 3.17.1 [11-1] Main—SMDR—SMDR Options—Condition Code
"RC"
Answered call Controls whether the time of answering an incoming trunk call is
shown.
→ 3.17.1 [11-1] Main—SMDR—SMDR Options—Condition Code
"AN"
Room status Controls whether room status changes are shown.
→ 3.17.1 [11-1] Main—SMDR—SMDR for External Hotel
Application 1—Room Status Control
Timed Reminder call Controls whether Timed Reminder calls are shown (→ 1.24.4
Timed Reminder).
→ 3.17.1 [11-1] Main—SMDR—SMDR for External Hotel
Application 1—Timed Reminder (Wake-up Call)
Printing Message Specifies the messages that can be selected from an extension (→
1.22.2 Printing Message).
→ 3.12.9 [6-8] Hotel & Charge—Main—SMDR for External Hotel
Application 2—Printing Message 1–8
Time format Controls whether time is displayed in 12-hour or 24-hour format.
→ 3.17.1 [11-1] Main—SMDR—SMDR Format—Time Format
(12H / 24H)
Item Description