1.23 Hospitality Features
290 Feature Guide
Conditions
• A maximum of four hotel operators can be assigned.
• Only one of each type of Room Status Control button can be assigned.
• Extensions associated with rooms must be one of the following types:
PT (including IP-PT), SLT, ISDN Extension
PSs cannot be checked in and out as room extensions.
• It is recommended that the extension number of a room extension is the same or similar to the room
number, for convenience.
• If enabled through system programming, the check-in and check-out information is recorded on SMDR.
Programming Manual References
PC Programming Manual
3.10.5 [4-1-4] Wired Extension—Flexible Button—Type
3.10.17 [4-3] DSS Console—Flexible Button—Type
3.12.9 [6-8] Hotel & Charge
→ Main—Hotel Operator—Extension 1–4
PT Programming Manual
None
Feature Guide References
1.6.1.3 Last Number Redial
1.8.3 Extension Dial Lock
1.22.1 Station Message Detail Recording (SMDR)
1.24.4 Timed Reminder
User Manual References
1.10.1 Using the Telephones in a Hotel-type Environment (Hospitality Features)
To Next Page
Loading...
