1.1 Incoming Call Features
Feature Guide 31
Different intercept destinations can be programmed for each time mode (day/lunch/break/night).
[Available Intercept Destinations]
**: By assigning the forward destination of a Virtual PS to a PS Ring Group or external pager, and
assigning Intercept Routing destinations to the Virtual PS, calls to these destinations will be redirected
to the Intercept Routing destination of the Virtual PS.
Intercept Destination Availability
Wired Extension (PT/SLT/ISDN Extension)
PS
Incoming Call Distribution Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
FWD Destination
<Forward Destination of Virtual PS>
Ext. No. of the Virtual PS
2001
600
......
"600" is an example of a
Floating Extension No.
for the External Pager
Intercept Destination
<Intercept Destination of Virtual PS>
...
...
...
2001 1001 1001 1001 1001
Day Lunch Break Night
...... ... ... ...
Ext. No. of the Virtual PS
When extension 2001 is called from another extension or is the first destination
of an incoming trunk call, etc., the call will ring at extension 600 (external pager)
first, and then ring at the intercept destination (extension 1001) after the IRNA
Timer expires.
Programming Example
To Next Page
Loading...
