2.3 System Data Control
Feature Guide 381
Conditions
• Only one system programming session can be in progress at a time, whether using a PC or a PT.
• Programmer Code and Password for System Programming
To access system programming, a programmer code and its password must be entered. For more
details, see Section 2.3.3 Password Security in this Feature Guide.
• Remote Programming Limitation
It is possible to disable remote access through system programming.
Installation Manual References
3.1 Overview
3.2 Connection
3.3 Installation of the KX-TDA30 Maintenance Console
Programming Manual References
PC Programming Manual
3.17.1 [11-1] Main
→ Remote
→ Password—System Password - PC Programming—User Level
→ Password—System Password - PC Programming—Administrator Level
→ Password—System Password - PC Programming—Installer Level
PT Programming Manual
[801] External Modem Control
[810] Remote Programming
[812] ISDN Remote Floating Extension Number
Feature Guide References
1.1.1.2 Direct In Line (DIL)
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
To Next Page
Loading...
