What to do if my Panasonic KX-TDA15 PBX telephone does not respond when buttons are pressed?
There are a couple of potential causes: * The telephone is locked, so unlock your telephone. * Your telephone is connected to an eXtra Device Port. If this is the case, system programming is required, so consult your dealer.
What to do if some features on my Panasonic KX-TDA15 phone don't work?
There are a couple of reasons why some features might not be working: * System management may be restricting certain features. If this is the case, consult your manager. * The feature numbers may have changed. If so, confirm the revised number and try again.
Why can't I make an outside call using the One-touch Dialling button on my Panasonic Telephone?
If you cannot make an outside call using the One-touch Dialling button, a line access number was not stored. A line access number is required for outside calls.
What to do if operations don't work on Panasonic Telephone?
If operations aren't working on your Panasonic Telephone, the Intercom line may not have been seized. Press the INTERCOM button after going off-hook and follow the instructions. Another reason could be that the seized line, when going off-hook, was changed by personal setting.
What to do if my Panasonic proprietary telephone does not have a feature button?
If your Panasonic proprietary telephone does not have a feature button, it may be because some models do not have the feature button. Change a flexible button to the desired button or enter the specified feature number instead of the feature button.
Why is my Panasonic Telephone line disconnected while talking to an outside party?
If your Panasonic Telephone line is disconnected while talking to someone, the time limit may have run out. Consult your dealer to extend the time limit, if necessary.
Why does redialling not function on my Panasonic Telephone?
Redialling may not function if the stored number was more than 32 digits or an extension number.
Why did the personal computer and fax machine communication fail using Panasonic Telephone?
If the personal computer and fax machine communication failed, it may be because an indication tone interrupted communication.
Why can't I send a call waiting tone to the dialled extension using Panasonic Telephone?
If you cannot send a call waiting tone to the dialled extension, it may be because the other party has not set the Call Waiting feature or the other party has set Data Line Security.
What to do if I forgot the password for my Panasonic Telephone?
Ask the manager to assist you.
Detailed steps for initiating various types of calls: extension, outside, private network, and account code.
Procedures for answering calls, hands-free answerback, and call pickup.
Operations and features available during an active call, such as transfer and hold.
Manager's ability to control other extensions, including dial lock and time service settings.
How managers can program call charges, extension controls, and system passwords.
Common problems and their solutions for telephone operation and features.
A reference table of feature codes and button sequences for quick access.
To Next Page
General