Panasonic KX-TDA50

3.3 Installation of the Hybrid IP-PBX PC Programming Software
Installation Manual 129
3. Type the Installer Level Programmer Code (INSTALLER),
then click [OK].
The Programmer Code authorizes different programming
levels, and the Quick Setup is only available when you start
the KX-TDA50 Maintenance Console with the Installer
Level Programmer Code.
Note
There are 2 other Programmer Codes with limited
authorization: Administrator Level (ADMIN), and User
Level (USER).
4. Click "Connect" → "USB" from the menu bar.
5. Type the system password for installer (default: 1234), then
click [OK] to log-in.
6. Follow the instructions of the wizard and assign the basic
items (Quick Setup).