7/17/2009 7
Revision 2
*Operation MenuÆ1.2 SIP settingsÆ1.2.4 Options
*1: If the port number of the server is not "5060", enter ":" and the specified port number after the
domain name or IP address.
[Example]
• If you do not need to specify the port number of the server (i.e., the port number is 5060):
Domain name format: example.com
IP address format: 192.168.1.1
• If you need to specify the port number of the server:
Domain name format: example.com:7777
IP address format: 192.168.1.1:7777
The value range of the port number is 1024–65535.
*2: No need to change unless necessary.
*3: The actual length of time depends on the negotiation with the SIP server or the other device.
Therefore, the Registration Timer will not always function for the length of time set in advance.
Step Command Purpose
Step 7
Enable PRACK (“100rel” option).
Specifies whether the PRACK
feature is enabled or disabled.
Step 8
Enable Session Timer.
Specifies whether Session Timer is
enabled or disabled.
Step 9
Set Session Timer(Offer).
Session Timer(Offer) = 180
Specifies the length of time that
the card offers for
Registration to the SIP server (if
required).
Step 10
Set Session Timer Method.
Specifies the method to be used for
Session Timer.
To Next Page
Loading...
