2.1.2 Time Service Mode Control
The manager extension or the preprogrammed extension can change the time mode (Day, Lunch, Break or
Night).
There are two methods (Automatic or Manual) of changing the time modes.
Automatic: enables the time mode for each day of the week to change automatically. You may also change
it manually.
Manual: enables to change a mode in manual as follows.
To change the time mode (Day/Night/Lunch/Break)
PT/PS
Press Time Service
(Day/Night/Lunch/Break)
until the desired mode
appears.
(Time Service
(Day/Night/
Lunch/Break))
While on-hook
PT/SLT/PS
Off-hook. On-hook.
Enter 780.
1
0
2
3
Day
Night
Lunch
Break
Enter 0 to 3
as you desire.
8 07
C.Tone
To select the time service switching mode (Automatic/Manual)
PT/PS
Press Time Service Switching
Mode (Automatic/Manual).
(Time Service
Switching Mode
(Automatic/Manual))
While on-hook
• Besides the time mode, there
is Holiday mode. It can change mode once on a specified date.
• The Time Service (Day/Night/Lunch/Break) button light shows the current status as follows:
Off: Day mode
Green on: Lunch mode
Flashing green: Break mode
Red on: Night mode
Flashing red: Holiday mode
• The Time Service Switching Mode (Automatic/Manual) button light shows the current status
as follows:
Off: Automatic
Red on: Manual
User Manual 189
2.1.2 Time Service Mode Control
To Next Page
Loading...
