EasyManuals Logo

Panasonic KX-TDE200 Network Guide

Panasonic KX-TDE200
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
(ii) VoIP Network with Another PBX
IP Network
Router
Switching Hub
Router
Switching Hub
PBX
PBX
Branch
Branch
Headquarters
Headquarters
Network Parameters
You will need to have the following IP addressing and QoS information to establish VoIP communication on
your network. This information is typically supplied by a network administrator.
Consult your network administrator for specific values.
Parameter Description
IP telephone IP Address
Identifies the location of IP telephones on the network. Each IP
telephone must have a unique IP address.
Subnet Mask Address
Defines which digits of an IP address are used for the network
address and the host address at each network location. The IP
addresses of
the IP telephones and the PBX must fall within the same
subnet as that of the default gateway (e.g., router) of the LAN.
Default Gateway Address
Identifies the IP address of the primary gateway (typically a router or
similar
device)
that exchanges IP packets with the other gateways on
the VoIP network.
IP Networking Guide 5
1.1.1 Establishing a VoIP Network with the Pure IP-PBX

Other manuals for Panasonic KX-TDE200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic KX-TDE200 and is the answer not in the manual?

Panasonic KX-TDE200 Specifications

General IconGeneral
LED indicatorsYes
SIP extensions128
Number of extensions256
Number of DECT cell stations32
Weight and Dimensions IconWeight and Dimensions
Weight15966.5 g
Dimensions (WxDxH)424 x 276 x 439 mm

Related product manuals