To Next PageTo Next Page
How to fix Panasonic PBX telephone when personal settings don't work?
If your Panasonic PBX telephone doesn't work with personal settings (One-touch dialling, forwarding destination, etc.), the extension line might have been changed. Clear the settings and then programme your desired settings again.
What to do if Panasonic KX-TDE200 PBX does not operate properly?
If your Panasonic PBX isn't operating correctly: * Press the Reset Button. * Turn the power switch off, then on again. * Turn off the power switch, unplug the PBX, wait 5 minutes, plug it back in, and turn the power switch back on. * If the error no. 41 is displayed in the error log, replace the IPCMEC card.
How to fix IP-PT cannot connect to Panasonic KX-TDE200 PBX?
If the IP-PT cannot connect to the Panasonic PBX, consider the following: * Incorrect IP address, subnet mask address, PBX IP address, or default gateway address: Check each parameter and enter the correct value. * Ethernet cable not connected correctly: Check the Ethernet cable connections. * DHCP server is not active: Restart the DHCP server, or disable DHCP and re-enter settings.
How to improve Panasonic PBX display?
To improve the display on your Panasonic PBX, try changing the Display contrast level.
What to do if my Panasonic PBX phone buttons are not responding?
If your Panasonic PBX telephone does not respond when buttons are pressed, it could be because the telephone is locked. Unlock your telephone. It is also possible that your telephone is connected to an eXtra Device Port, and in this case system programming is required, so consult your dealer.
How to improve the display on my Panasonic KX-TDE200?
To improve the display on your Panasonic PBX, change the Display contrast level.
What does it mean when the ALARM indicator is red on my Panasonic KX-TDE200?
If the ALARM indicator on the front of the shelf turns on red on your Panasonic PBX, it indicates a major system error. To troubleshoot this, see the error log using the KX-TDE Maintenance Console.
Why did PC and fax communication fail with Panasonic KX-TDE200?
If the PC and fax machine communication failed with your Panasonic PBX, an indication tone may have interrupted communication.
Why some features do not work on my Panasonic PBX?
If some features on your Panasonic PBX system are not working, it could be due to system management restrictions. In this case, consult your manager. Alternatively, the feature numbers might have changed, so confirm the revised number and try again.
How to troubleshoot a Panasonic PBX telephone that does not work properly?
If your Panasonic PBX telephone isn't working properly, first confirm with your manager that your settings are correct. If the problem persists, you should consult your dealer.
General| LED indicators | Yes |
|---|---|
| SIP extensions | 128 |
| Number of extensions | 256 |
| Number of DECT cell stations | 32 |
Weight and Dimensions| Weight | 15966.5 g |
|---|---|
| Dimensions (WxDxH) | 424 x 276 x 439 mm |
