To Next PageTo Next Page
Why is the line disconnected while talking to an outside party on Panasonic KX-TDE200 PBX?
If the line is disconnected while you are talking to an outside party on your Panasonic PBX, the time limit may have run out. Consult your dealer to extend the time limit, if necessary.
What to do if proprietary telephone operations do not work even after following the manual instructions on Panasonic KX-TDE200?
If none of the operations work when using a proprietary telephone on your Panasonic PBX, even after following the manual instructions, the Intercom line was not seized. If the setting has been changed, press the INTERCOM or PDN button after going off-hook and follow the instructions. Alternatively, the seized line, when going off-hook, may have been changed by personal setting.
How to fix KX-HGT100 problems on Panasonic PBX?
If the KX-HGT100 isn't working correctly or some features are unavailable on your Panasonic PBX, the firmware of the KX-HGT100 and the MPR software file version of the PBX might not be upgraded to their latest versions. Upgrade the firmware of the KX-HGT100 and the MPR software file version of the PBX to their latest versions.
What to do if my Panasonic PBX is not working correctly?
To address a Panasonic PBX that is not operating properly, press the Reset Button. Turn off the power switch, and then turn it back on. Turn off the power switch, and then unplug the PBX. After 5 minutes, plug the PBX back in, and turn the power switch back on.
How to fix Panasonic PBX telephone when personal settings don't work?
If your Panasonic PBX telephone doesn't work with personal settings (One-touch dialling, forwarding destination, etc.), the extension line might have been changed. Clear the settings and then programme your desired settings again.
Why did the PC and fax machine communication fail on Panasonic Telephone?
The PC and fax machine communication might have failed because an indication tone may have interrupted communication.
What to do if Panasonic PBX telephone does not respond?
If your Panasonic PBX telephone isn't responding when you press the buttons, it could be because the telephone is locked. Try unlocking your telephone. Another reason might be that your telephone is connected to an eXtra Device Port, which requires system programming. In this case, consult your dealer.
How to fix Panasonic KX-TDE200 one-touch dialling?
If you cannot make an outside call using the One-touch Dialling button or speed dialling on your Panasonic PBX, it is likely that a line access number was not stored. A line access number is required for outside calls.
How to troubleshoot Panasonic KX-TDE200 telephone?
If your Panasonic PBX telephone isn't working properly, first confirm with your manager that your settings are correct. If the problem continues, it's best to consult your dealer for further assistance.
Why some Panasonic KX-TDE200 features do not work?
If some features on your Panasonic PBX aren't working, it could be because system management has restricted certain features; in this case, consult your manager. It's also possible that the feature numbers have changed, so confirm the revised number and try again.
General| LED indicators | Yes |
|---|---|
| SIP extensions | 128 |
| Number of extensions | 256 |
| Number of DECT cell stations | 32 |
Weight and Dimensions| Weight | 15966.5 g |
|---|---|
| Dimensions (WxDxH) | 424 x 276 x 439 mm |
