Panasonic KX-TDE200NZ

1.2 Making Calls
User Manual 49
1.2.6 Alternating the Calling Method (Alternate Calling—Ring/
Voice)
To change the method
The caller can alternate the alerting method, either ring or
voice, when making an intercom call.
On the other hand, any extension can set the alerting method,
either ring or voice, when receiving an intercom call.
Ringing (Default): You can call the other party with a ring
tone.
Voice-calling: You can talk to the other party immediately
after confirmation tone.
• Voice-calling from a SIP Extension is not available.
• If the called party uses a SIP Extension, single line telephone (SLT) or portable station (PS),
Voice-calling is not available.
• This feature is not available when the called party's telephone is in the Voice Call Deny mode.
Customising Your Phone
• 3.1.2 Settings on the Programming Mode—Alternate Receiving—Ring/Voice
Select the alerting method, either ring or the other party's voice.
Ring
Ring
Hello
OR
After dialling
Enter .
PT/SLT/PS
Talk.
C.Tone