Panasonic KX-TDE600 - Call Splitting

Destination Availability
PS
ü
Incoming Call Distribution Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
ü
Trunk Group Access no. + Trunk Group no. + Phone no.
ü
Other PBX Extension (TIE with no PBX Code)
ü
*1
Other PBX Extension (TIE with PBX Code)
ü
*1
*1
Only available when the networking type of the trunk is assigned as private.
Join After Time Out
When conference
group members do not answer a conference group call within the preprogrammed time limit,
the member's telephones will stop ringing. However, even after the time limit has expired, members can join
the conference.
Additionally, extension users not registered in the called conference group can join a conference after it has
started. Outside callers using DISA and TIE line users can also join a conference after accessing their extension
using Walking COS.
An entry code can also be specified to restrict access to the call. The entry code can be set when the caller
initiates the conference group call. If an entry code is to be set, usually the caller will inform call participants in
advance.
Conditions
• Only PTs that are permitted by COS programming can originate conference group calls.
• After one conference group member answers the call, the conference or announcement is established.
• If no members answer the call within the preprogrammed time limit, the caller will hear a busy tone.
• The caller will hear a confirmation tone every time a member answers the call.
• When the originating caller of a conference group call goes on hook, the call ends and all participating
members will be disconnected.
• The conference group call will reach a member extension regardless of settings such as Call Forwarding
(except DND).
• If a member extension is busy and has Call Waiting for trunk calls activated when a conference group call
is made, a call waiting tone will be sent to the extension.
• The call information of the caller (not members) will be recorded on SMDR.
• A caller cannot make a conference group call with a call on hold.
• Call Pickup is not available for a conference group call. (® 1.4.1.3 Call Pickup)
• The conference group call will not reach members when:
– the member extension has set DND for intercom calls.
Feature Guide 181
1.15.1 Conference Group Call