To Next Page
B
Barbara ParkerSep 15, 2025
How to adjust Panasonic KX-TEB308 PBX display brightness?
- HherrerakathleenSep 15, 2025
If the display is dim on your Panasonic PBX, change the display contrast level.
How to adjust Panasonic KX-TEB308 PBX display brightness?
If the display is dim on your Panasonic PBX, change the display contrast level.
Why is speed dialling not working on my Panasonic KX-TEB308?
If speed dialling or one-touch dialling isn't working on your Panasonic PBX, the programming might be incorrect. Make sure you've stored the outside (CO) line access number (e.g., 9, 0, or 81-83) at the beginning of the telephone number.
What to do if outside calls cannot be made with a Panasonic KX-TEB308 PT?
If you can't make outside calls with a proprietary telephone (PT) on your Panasonic PBX, a flexible button on the PT may not be programmed to select an outside (CO) line. Program the CO buttons to resolve this.
Why is my Panasonic KX-TEB308 proprietary telephone not ringing?
If your Panasonic PBX proprietary telephone (PT) isn't ringing, the ringer volume might be set to off. Adjust the ringer volume to either 'HIGH' or 'LOW'.
How to fix distorted audio (Music on Hold) on Panasonic KX-TEB308 PBX?
If the audio, such as Music on Hold or Background Music, is distorted on your Panasonic PBX, the audio level from the output of the audio source might be too high. Decrease the output level of the external audio source using its volume control.
How to customize buttons on Panasonic PBX phone?
If your PT does not have the button needed to perform a certain operation on your Panasonic PBX, it is because some models do not have certain feature buttons. Customise a flexible button to function as the desired button.
Why can't I make an outside call with speed dial on my Panasonic KX-TEB308?
If you cannot make an outside call using One-touch Dialling or Speed Dialling on your Panasonic PBX, it is because an outside (CO) line access number was not stored with the phone number. An outside (CO) line access number is required for outside (CO) line calls.
Why doesn't the redial feature work on my Panasonic PBX?
If the Redial feature does not function on your Panasonic PBX, it is because the stored number is more than 64 digits long, or is an extension number. Redialling can only be used with outside (CO) line numbers of 64 digits or less.
Why is the MESSAGE button light on my Panasonic KX-TEB308 PBX phone lit?
The MESSAGE/Message button light or Message/Ringer Lamp is lit because someone has left a message waiting indication for you, or someone has left a Voice Mail message for you. Press the MESSAGE/Message button to call the party back or receive the message.
What if Panasonic KX-TEB308 PBX does not operate correctly after restarting?
clear the programming data stored in the PBX.
General| Caller ID Compatibility | Yes |
|---|---|
| Uniform Call Distribution (UCD) | Yes |
| PC Programming | Yes |
| Emergency Call Forwarding | Yes |
| Voicemail | Optional |
| Conference | Yes |
| Power Failure Transfer | Yes |
| Capacity | 3 CO lines and 8 extensions |
| Power Supply | AC 220-240 V, 50/60 Hz |
| Direct Inward System Access (DISA) | Yes |
| Built-in Voice Message (BV) | Not available |
