Panasonic KX-TEB308 - Page 146

1.20 Administrative Information Output Features
146 Feature Guide
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR.
[Programmable Items]
(6) Duration Shows the duration of the outside (CO) line call or the UCD call
waiting time in hours/minutes/seconds.
(7) Code Shows the account code appended to the call ( 1.5.2.3
Account Code Entry), the account code index number (e.g.,
13), the number of the extension that used the Walking COS
feature (e.g., 101), or DISA security code status (e.g., 0).
0: A DISA incoming call without a DISA security code
1 to 4: A DISA incoming call with a DISA security code number
Actual DISA security codes are not printed by SMDR ( DISA
Security Code [512]).
Item Description
Incoming/Outgoing outside
(CO) line call
Controls whether incoming/outgoing outside (CO) line calls are
shown (
Incoming/Outgoing Call Selection for Printing [802]). Even
if "On" or "Toll" is selected for outgoing outside (CO) line calls or even
if "On" is selected for incoming outside (CO) line calls, when "MODE
2" is selected in
SMDR Mode for Printing [929], the call log
information is not displayed by SMDR, but the information for each
extension is displayed by Call Log Printout.
If "Toll" is selected for outgoing outside (CO) line calls, only calls that
are checked in
TRS—COS 2-5 Denied Code [302-305] and are
allowed, are shown.
Caller's identification Controls whether a caller's telephone number is shown ( Caller ID
SMDR Format [906]). When this is set to display telephone numbers,
even if the PBX receives a caller's name by the Caller ID feature, only
the telephone number is shown.
Secret Dialling Controls whether secret dialling numbers stored in System Speed
Dialling Number [001] or stored in One-touch Dialling button are
shown by SMDR ( Secret Number SMDR Print Suppression [803]).
Account Code Controls whether the account code stored in Account Code [310] or
just the index of the account code is shown ( SMDR Account Code
[805]). The index of the account code is shown when "Verify-All" or
"Verify-Toll" is selected in Account Code Mode [605].
Section Number Data Description