1.4 During a Conversation
User Manual 59
To disconnect a 5-party conference call
• * Enter "#22 " when "Plan 2" or "Plan 3" is selected as the numbering plan through
system programming.
• Only one 5-party conference call can be in progress at a time.
• You cannot change to a 5-party conference call during a 3-party conference call among 3
extensions.
• If a parked call is not retrieved within 5 minutes while you are trying to establish a
5-party conference call, you will hear a ring tone. If you are having a conversation with
another party at that time, you will hear an alarm tone.
• If you hear a busy tone after dialling the desired phone number or if you dial a wrong
phone number, press the FLASH/RECALL button to retry.
• If you want to talk to the other 2 parties on hold again before the fourth party
answers, first go on-hook, then follow the Call Park Retrieve procedure and press the
CONF button to retrieve each of the held calls.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit a Conference button.
PT
On-hook.
At the original extension
To Next Page
