Preparation
15
Programmable Settings
Display Language
You can select either “English” or “Français” (French) as the display language. The
factory preset is “English”.
• If you select a language you cannot read, change the display language again
using direct commands (p. 77).
For Call Display service users (p. 33)
• When a call is received, the unit automatically adjusts the date and time if the
time is incorrect.
• The unit will automatically adjust the date and time for daylight saving time.
• If the date and time have not previously been set, the unit will not automatically
adjust the date and time.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Change language” by pressing [
d
]
or [
B
], then press Select.
4 Press Select at “Display”.
5 To change from English to French, press
Franç.
To change from French to English, press
English.
• The display changes to the selected language.
• You can also select a language by pressing [
d
] or
[
B
].
6 When French is selected, press Sauv., then press [OFF].
When English is selected, press Save, then press [OFF].
Handset
Initial setting
Back Select
K
d
BL
Change language
Back Select
K
d
BL
Display
Back Select
K
d
BL
Display
:English
Franç. Save
K
L
PQQX14031ZA.book 15 ページ ２００４年６月２１日 月曜日 午後３時４４分
To Next Page
Loading...
