Panasonic KX-TG2357C

Remote Operation from a Touch Tone Phone
70
Remote Code
The remote code prevents unauthorized people from accessing your unit and
listening to your messages. Choose any 2-digit number (00–99) for your remote
code. The factory preset remote code is “11”. If you do not program your own
remote code, you can use “11”.
To confirm the remote code, repeat steps 1 to 4.
• The remote code is displayed. When finished, press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [ d ]
or [
B ], then press Select.
3 Press Select at “Set answering”.
4 Scroll to “Remote code” by pressing [ d ] or
[
B ], then press Select.
5 Enter a 2-digit remote code (00–99).
6 Press Save, then press [OFF].
Handset
Initial setting
Back Select
K
d BL
Set answering
Back Select
K
d BL
Remote code
Back Select
K
d BL
Remote code
:11
Back Save
K
L
PQQX14031ZA.book 70 ページ ２００４年６月２１日 月曜日 午後３時４４分