9
Preparation
Installation
Connections
Base unit
• Base Unit: USE ONLY WITH Panasonic AC ADAPTOR PQLV1.
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• If your unit is connected to a PBX which does not support Call Display services,
you cannot access those services.
• The unit will not work during a power failure. We recommend connecting a
standard telephone to the same telephone line or to the same telephone jack
using a T-adaptor.
Charger unit
• Charger unit: USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1.
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
Fasten the cords.
Single-Line Telephone Jack (CA11A)
Telephone Line Cord
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
Hooks
Power Outlet (AC 120 V, 60 Hz)
AC Adaptor
PQQX14031ZA.book 9 ページ ２００４年６月２１日 月曜日 午後３時４４分
To Next Page
Loading...
