Special Features
Telephone System
57
After selecting “Ans” (Answer) or “Hold”:
You can choose one of the following options:
“Return”—to return to the waiting call.
“Drop”—to hang up the current call and answer the waiting call.
“Conference”—to make a conference call.
1. Press [FLASH/CALL WAIT] to display the option
menu.
2. Enter a displayed option number (1 to 3) to select
the desired option.
•If “Return” is selected, you will return to the waiting call. Repeat steps 1 and 2 on
page 56 to select another option.
After selecting “Conf” (Conference):
You can choose one of the following options:
“Drop caller1”—to hang up the first call.
“Drop caller2”—to hang up the second call.
1. Press [FLASH/CALL WAIT] to display the option
menu.
2. Enter a displayed option number (1 or 2) to select
the desired option.
• In step 2, you can also select the desired option by pressing [
d
] or [
B
] until the
option flashes, then pressing [FLASH/CALL WAIT].
• To cancel the option menu, wait for 20 seconds. The handset display will return to
the length of the call.
• Call Waiting cannot be used when a parallel connected telephone is in use.
• If this function does not operate properly, consult your telephone company for
details.
1=Return
2=Drop
3=Conference
04
1=Drop caller1
2=Drop caller2
04
PQQX14031ZA.book 57 ページ ２００４年６月２１日 月曜日 午後３時４４分
To Next Page
Loading...
