77
Direct Commands
Useful Information
During programming:
When “Save” or “Sauv.” is displayed, press the right soft key to save the new
settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
Recording time [0] [6] [2] [1] : 1 minute [2] : 2 minutes
[3] : 3 minutes
[0] : Greeting only
p. 25
Remote code [0] [6] [3] Go to Step 5 on page 70. —
Recording mode [0] [6] [4] [1] : Standard recording
[2] : Enhanced recording
p. 26
Display language [0] [8] [1] [1] : English [2] : French p. 15
Voice guidance language [0] [8] [2] [1] : English [2] : French p. 16
Message alert [0] [#][1] : On [0] : Off p. 27
Ringer tone
(for base unit)
[0] [*] [1] [1]–[3] : Tone pattern 1-3
[4]–[7] : Melody pattern 1-4
p. 21
Incoming call tone
(for base unit)
[0] [*] [2] [1] : On [2] : Twice [0] : Off p. 59
Talking Call Display
(for base unit)
[0] [*] [4] [1] : On [0] : Off p. 35
Menu item Command Selection items Page
PQQX14031ZA.book 77 ページ ２００４年６月２１日 月曜日 午後３時４４分
To Next Page
Loading...
