Panasonic KX-TG2511FX

Questions and Answers:

P
paulmurphySep 2, 2025
Why is caller information not displayed on my Panasonic KX-TG2511FX Cordless Telephone?
- P
  Patrick WilliamsSep 2, 2025
  If caller information is not displayed on your Panasonic Cordless Telephone, you may need to subscribe to a Caller ID service. If you are subscribed, ensure the unit is plugged directly into the wall jack without any additional telephone equipment. If you use a DSL/ADSL service, connect a DSL/ADSL filter between the base unit and the telephone line jack. Disconnect other telephone equipment that may be interfering with the unit.
M
Matthew WallerAug 31, 2025
Why does my Panasonic KX-TG2511FX still flash after fully charging the batteries?
- A
  Anthony ParkerAug 31, 2025
  If you have fully charged the batteries of your Panasonic Cordless Telephone, but the display still flashes or the operating time seems shorter, clean the battery ends and the charge contacts with a dry cloth and charge again. It may also be time to replace the batteries.
Y
Yvonne MccallAug 29, 2025
Why I cannot make a call on my Panasonic KX-TG2511FX Cordless Telephone?
- J
  John ReyesAug 29, 2025
  If you cannot make a call on your Panasonic Cordless Telephone, the dialing mode may be set incorrectly; change the setting. Ensure the handset is not too far from the base unit. If another unit or the answering system is in use, wait and try again later.
J
johnsonsandraAug 28, 2025
What does it mean when w is flashing on my Panasonic KX-TG2511FX Cordless Telephone?
- K
  kimberlysloanAug 28, 2025
  If the w symbol is flashing on your Panasonic Cordless Telephone, the handset may be too far from the base unit; try moving closer. Ensure the base unit’s AC adapter is properly connected. The handset may not be registered to the base unit; in this case, register it. Activating one-touch eco mode can also reduce the base unit's range, so try turning eco mode off.
F
fosterscottAug 26, 2025
What to do if my Panasonic KX-TG2511FX does not work?
- W
  Wendy RobbinsAug 26, 2025
  If your Panasonic Cordless Telephone unit is not working, first ensure the batteries are installed correctly and fully charged. Check all connections. Try unplugging the base unit’s AC adapter to reset the unit, then turn the handset off and on. If the handset has not been registered to the base unit, register it.
R
Reginald KellyAug 25, 2025
Why does my Panasonic KX-TG2511FX beep and/or flash 7 times?
- C
  Christina BullockAug 25, 2025
  If your Panasonic Cordless Telephone handset beeps and/or displays 7 flashes, it indicates that the battery charge is low. Fully charge the batteries.
M
Melissa AllenAug 22, 2025
Why does my Panasonic KX-TG2511FX Cordless Telephone have noise and sound cutting in and out?
- J
  Jordan MooreAug 22, 2025
  If you are experiencing noise or sound cutting in and out on your Panasonic Cordless Telephone, it could be due to electrical interference. Try repositioning the base unit and using the handset away from sources of interference. Moving closer to the base unit may also help. If you use a DSL/ADSL service, consider connecting a DSL/ADSL filter between the base unit and the telephone line jack. You can also try unplugging the base unit’s AC adaptor to reset the unit.

Panasonic KX-TG2511FX Specifications

General

Type	DECT telephone
Answering machine	No
Number of melodies	16
Mounting type	Desk
Product color	Black
Speakerphone	Yes
Dialer location	Handset
Phonebook capacity	50 entries
Redial list capacity	10
Call list capacity phonebook	50
Volume control	Digital
Backlight color	Orange
Display diagonal	1.4 \
Display number of lines	3 lines
Display number of colors	Monochrome
Battery type	AAA
Standby time	170 h
Battery recharge time	7 h
Power consumption (typical)	0.45 W
Number of batteries supported	2
Number of handsets included	1