22
Preparing the Answering System
1
Press (FUNCTION/EXIT/CH).
2
Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT á (Yes key).
4
Press Ö or Ñ repeatedly until the arrow
points to “TAD program”.
5
Press FWD/EDIT á (Yes key).
•The base unit display shows programming
options.
6
Press (0).
•“Set time” is announced.
If previously adjusted, the day/time will be
heard.
7
Enter the time (hour and minute) using a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
8
Press (*) to select “AM” or “PM”.
Press
(#) repeatedly to set the day.
Day and Time Adjustment
Voice Time/Day Stamp: During playback, a synthesized voice will
announce the day and time that each message was recorded.
SUN 12:00 AM
=AM/PM #=Day
Base unit display
H
Program
GF H
=Yes
H
Save DIRECT#
Set flash time
GF H
=Yes
Talk switching
H
TAD program
GF H
=Yes
Answering
system setting.
See base unit.
H
Save directory
Ringer volume
GF H
=Yes
To Next Page
Loading...
