Panasonic KX-TG2583B

24
Selecting the Caller’s Recording Time
You can select “1 minute”, “3 minutes” or “Greeting only” for the caller’s
recording time. Your phone comes from the factory set to “3 minutes”.
1
Press (FUNCTION/EXIT/CH).
2
Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT á (Yes key).
4
Press Ö or Ñ repeatedly until the arrow
points to “TAD program”.
5
Press FWD/EDIT á (Yes key).
•The base unit display shows programming
options.
6
Press (5).
•The current setting is displayed on the base
unit.
7
Press (1), (2) or (3) to select the recording
time.
1: 1 minute
2: 3 minutes
3: Greeting only
8
Press FWD/EDIT á (Save key).
•A beep sounds.
•To return to the standby mode, press (FUNCTION/EXIT/CH).
If you select “Greeting only”, the unit will answer a call with the greeting
message, and then hang up. The unit will not record any incoming
messages. The base unit display will show “Greeting only” in the
standby mode.
H Program
GF H =Yes
H Save DIRECT#
Set flash time
GF H =Yes
Talk switching
H TAD program
GF H =Yes
Answering
system setting.
See base unit.
H Save directory
Ringer volume
GF H =Yes
Recording time
:3min
Base unit display
Recording time
:Greeting only
Base unit display
Preparing the Answering System