Panasonic KX-TG2583B

53
Cordless Telephone
During an intercom call:
•Intercom calls can only be ended with the handset.
•If the handset user has difficulty hearing the base unit user, decrease the
base unit speaker volume by pressing Ö on the base unit.
•If an incoming call is received, the intercom call stops and the unit starts to
ring. To answer, press (TALK) or (DIGITAL!SP-PHONE).
Transferring a Call Using the Intercom
The intercom can be used during a call. This feature enables you to
transfer a call between the handset and the base unit.
From the handset to the
base unit
1
Handset:
During a call, press
(INTERCOM/CLEAR). Talk to
the paged party after the
beeps.
•The call is put on hold and
“Intercom hold” is displayed.
•If the base unit user does not
answer, press (TALK).
2
Base unit:
When the paging party’s
voice is heard, answer using
the MIC.
3
Base unit:
To answer the call, press
(DIGITAL!SP-PHONE).
•The transfer is complete.
From the base unit to the
handset
1
Base unit:
During a call, press
(LOCATOR/INTERCOM).
•The call is put on hold and
“Paging” is displayed.
•If the handset user does not
answer, press
(DIGITAL!SP-PHONE).
2
Handset:
Press
(INTERCOM/CLEAR) to
answer the page.
•“Intercom hold” is displayed.
3
Handset:
To answer the call, press
(TALK).
•The transfer is complete.