Panasonic KX-TG4321 - Page 22

Programming
22
For assistance, please visit http://www.panasonic.com/help
Programming using the direct commands
1
{MENU} i {# }
2 Enter the desired feature code.
3 Enter the desired setting code. i {Save}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L In the following table, < > indicates the default settings.
Feature Feature
code
Setting code System
setting
*1
Page
Alarm {7}{2}{0}{1}: Once {2}: Daily
{0}: <Off>
–25
Auto talk
*2
{2}{0}{0}{1}: On {0}: <Off>–15
Caller ID edit
(Caller ID number
auto edit)
{2}{1}{4}{1}: <On> {0}: Off r 28
Customer
support
{6}{8}{0} ––26
Date and time {1}{0}{1} – r 14
Deregistration {1}{3}{1} ––26
Display
(Change language)
{1}{1}{0}{1}: <English>
{2}: Español
–14
HS
registration
(Handset
registration)
{1}{3}{0} ––26
Key tone
*3
{1}{6}{5}{1}: <On> {0}: Off ––
LCD contrast
(Display contrast)
{1}{4}{5}{1}–{6}: Level 1–6 <3> – –
Message alert {3}{4}{0}{1}: <On> {0}: Off –35
Message play {3}{0}{0} ––32
Night mode
(On/Off)
{2}{3}{8}{1}: On {0}: <Off>–25
Night mode
(Start/End)
{2}{3}{7} <11:00 PM/06:00 AM>– 25
Recording time {3}{0}{5}{1}: 1min {2}: 2min
{3}: <3min>
{0}: Greeting only
r 35
Remote code {3}{0}{6} <111> r 33
TG43xx_OI.book Page 22 Tuesday, December 11, 2007 2:04 PM