– 2 –
Step 3
Setting Date and Time
1 Press [MENU].
2 Scroll to “Date and time” by
pressing [d] or [B], then press
the soft key ( ).
3 1 Enter 2 digits each for the
month, day and year.
(Ex. To set June 15, 2005,
enter “06 15 05”.)
2 Enter 4 digits for the time
(hour and minute). (Ex. To set
9:30, enter “0930”.)
• To move the cursor, press the soft
key ( ) or ( ).
4 Select “AM” or “PM” by pressing [*].
5 Press the soft key ( ), then press [OFF].
• To confirm the date and time, repeat steps 1 and 2.
The current date and time are displayed. When finished, press
[OFF].
Step 4
Recording Your Own Greeting (Optional)
You can record a personal greeting message of up to 2 minutes. If you do not record
your own message, one of two pre-recorded greetings will be played for callers.
For details, see pages 22–23 in the Operating Instructions.
Press
[GREETING REC]
twice.
After the long beep,
talk into the MIC.
When finished, press
[GREETING REC] or
[STOP].
• To instruct callers to leave a message in a specific mailbox (Mailbox 1,
Mailbox 2, or Mailbox 3):
You can record a message, such as “Hello, this is (your name and/or number). Sorry,
we cannot take your call. If you have a message, for John press [#] and [1], for Jane
press [#] and [2], for Jack press [#] and [3], before the beep. Or just stay on the line
and leave a message after the beep. Thank you.”
BACK
SELECT
B
Date and time
d
BACK
PLAY
SELECT
f g
Date:
|
12.31.2004
Time:12:00 AM
0-9=Date&Time
@=AM/PM
f g
SAVE
Date:
|
06.15.2005
Time:09:30 AM
0-9=Date&Time
@=AM/PM
f g
SAVE
SAVE
To Next Page
Loading...
