Displays
10
Base unit
1“ ” indicates the base unit ringer is off (p. 20).
2“ ” flashes when no new messages can be
recorded. Erase unnecessary messages (p. 62).
3“E” flashes until you set the date and time, and flashes
after a power failure. If it is flashing, set the date and
time (p. 16).
4 Message counter shows:
— the total number of recorded messages in all mailboxes. If the recording time
is set to “Greeting only”, “ ” will be displayed (p. 24).
— the selected volume level while you are adjusting the speaker volume
(p. 23, 30).
—
“ ” when
[PROGRAM]
is pressed to store a phone number (p. 44).
— “ ” when your greeting message or memo message was not recorded
correctly (p. 22, 63).
5 If there are new messages in a mailbox, its icon will flash. If there are only old
messages, the icon will be lit. If there are no messages in a mailbox, its icon will
not be shown.
12 3 4
R
To Next Page
Loading...
