Setting up
Connections
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Connect the telephone line cord to the unit
until you hear a click.
Fasten the AC adaptor cord and the telephone
line cord by hooking it.
Connect the AC adaptor to the power outlet.
Connect the telephone line cord to the
single-line telephone jack (RJ11C) until you
hear a click.
A DSL/ADSL filter (not supplied) is required if
you have a DSL/ADSL service.
Connect the corded handset cord to the
corded handset and the base unit until you
hear a click.
Note:
R Use only the supplied Panasonic AC adaptor
PNLV226.
R Follow the directions on the display to set up
the unit.
n Charger
Connect the AC adaptor to the power outlet.
Handset battery installation
R USE ONLY rechargeable Ni-MH batteries AAA
(R03) size (
).
R Do NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
R Follow the directions on the display to set up
the unit.
8
For assistance, please visit www.panasonic.com/support
Getting Started
TGF35x(en)_1205_ver041.pdf 8 2014/12/05 21:38:30
To Next Page
Loading...
