Panasonic KX-TG6411 - Programming; Programmable settings; Programming by scrolling through the display menus

Programming
19
For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 19)
– using the direct commands (page 21)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2 Press {V} or {^} to select the desired main menu. i {SELECT}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4 Press {V} or {^} to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 21 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Caller list
W
––29
Set date / time
E
(KX-TG6411 series:
page 3)
Date and time
*1
–13
Alarm –24
Time adjust
*1
––
Answering device
s
(KX-TG6421 series:
page 3)
Play new msg. –33
Play all msg. –33
Erase all msg.
*1
–33
Greeting Record
greeting
*1
32
Check greeting 32
Pre-recorded
*1
32
Settings Ring count
*1
35
Recording time
*1
36
Remote code
*1
33
Answer on
*1
–31
Answer off
*1
–31
V.M. access
#
––38
TG640x(e).book Page 19 Wednesday, November 26, 2008 2:33 PM