Panasonic KX-TG6411 - Erasing Selected Caller Information; Erasing All Caller Information

Caller ID Service
30
For assistance, please visit http://www.panasonic.com/help
callers in your area, so that you can call
these local numbers using caller
information without dialing the area
code.
To activate this feature, you must edit an
entry in the caller list, then call that
number. After that, phone numbers from
that caller’s area code are edited
automatically.
This feature can be turned on or off
(page 21).
Note:
L Phone numbers from the 4 most
recently edited area codes are
automatically edited.
L If you move to another area, you can
turn this feature off to erase previously
edited area codes. To use this feature
again, turn it on and reprogram the
area codes you want to edit once
again.
Erasing selected caller
information
1
{MENU} i {#}{2}{1}{3}
2 {V}/{^}: Select the desired entry.
3 {ERASE} i {V}/{^}: “Yes” i
{SELECT} i {OFF}
Erasing all caller information
1
{MENU} i {#}{2}{1}{3}
2 {ERASE} i {V}/{^}: “Yes” i
{SELECT}
Storing caller information to
the phonebook
1
{MENU} i {#}{2}{1}{3}
2 {V}/{^}: Select the desired entry.
L To edit the number, press {EDIT}
repeatedly until the phone
number is shown in the desired
format.
3 {SAVE}
4 {V}/{^}: “Phonebook” i
{SELECT}
5 Continue from step 2, “Editing
entries”, page 18.
TG640x(e).book Page 30 Wednesday, November 26, 2008 2:33 PM