Answering System
32
For assistance, please visit http://www.panasonic.com/help
intercom, the speaker volume for call
screening is turned on again.
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Recording your greeting
message using the handset
1
{MENU} i {# }{3}{0}{2}
2 {V}/{^}: “Yes” i {SELECT}
3 After a beep sounds, speak clearly
(2 minutes max.).
4 Press {STOP} to stop recording.
5 {OFF}
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded
greeting messages:
– If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers
to leave a message.
– If the message recording time (page
36) is set to “Greeting only”,
callers’ messages are not recorded
and the unit plays a different pre-
recorded greeting message asking
callers to call again.
Erasing your greeting message
(Resetting to a pre-recorded greeting
message)
If you want to use a pre-recorded
greeting message once you record your
own greeting message, you need to
erase your own greeting message.
1 {MENU} i {#}{3}{0}{4}
2 {YES} i {OFF}
Playing back the greeting
message
1
{MENU} i {#}{3}{0}{3}
2 {OFF}
Listening to messages
using the base unit
When new messages have been
recorded, the message indicator on the
base unit flashes.
Press {6}.
L If new messages have been recorded,
the base unit plays back new
messages.
L If there are no new messages, the
base unit plays back all messages.
Operating the answering
system during playback
Key Operation
{^} or {V} Adjust the speaker
volume
{7} Repeat message
*1
{8} Skip message
{■}
(STOP)
Pause message
– To resume playback,
press {6}.
– To stop playback
completely, press
{■} (STOP) again.
{ERASE} Erase currently playing
message
TG643x(e).book Page 32 Monday, December 1, 2008 10:13 AM
To Next Page
Loading...
